Description

DL-59 Series

Dome Loaded High Pressure Regulator

Responding to the needs of the industry for a simple, safe and effective way to remotely load high pressure regulators, GO Regulator designed and developed a line of low profile dome loading units.

This compact and robust design employs a unique “Dual Piston” set up which enables the user to control pressures up to 4,000 psig with as little as 36 psig of dome pressure. All of this is accomplished within the smallest envelope the industry has to offer!

The regulator portion of this unit was patterned after the time-tested PR-59 Series, which is widely recognized as a benchmark of performance and quality. Offering the utmost in safety and corrosion prevention, this unit is constructed from 316L stainless steel. A carefully engineered piston sensor unit offers good sensitivity and repeatability. This is coupled with the large Cv of the PR-59 of 1.20.

Completing this design is the addition of an anodized aluminum (316 stainless steel optional) dome unit. The inlet ring to the dome is freely rotating and captured by a high tensile snap ring. This feature allows easy positioning and alignment of the dome gas line within a customer’s system while maintaining excellent leak integrity.

Typically, the low pressure gas to the dome is controlled by the GO Regulator PR-11 (optional) with a range of 0–250 psig and self-relieving option.

  • Gas or liquid service
  • 316L stainless steel construction
  • Better than 25 Ra finish in diaphragm cavity
  • Stainless steel piston sensor
  • Cv of 1.20 is standard
  • 20 micron inlet filter
  • Bubble tight shutoff
  • Dome ratios are 11:1; 20:1; 43:1, 56:1, 76:1 and 108:1
  • Proof pressure is 2 times maximum working pressure
  • Burst pressure is 4 times maximum working pressure
  • Weight: 8.4 lbs (2.31 kg)
  • Mounting style is in line or panel (see Outline and mounting dimensions)
Maximum Temperature & Operating Inlet Pressures
Seat Material Maximum Temperature @ Maximum Operating
Inlet Pressure
PCTFE 175° F (80° C) @ 4000 psig (27.58 MPa)
PTFE 150° F (66° C) @ 1000 psig (6.90 MPa)

Attachements

View further documentation here