Description
Measuring moisture in natural gas is not a difficult application, but reliably measuring on a continuous basis is. Glycols and entrained compressor oils can quickly contaminate or damage most moisture sensors. In addition, many moisture analyzers have no means to detect the presence of such contamination, leading to inaccurately monitored or completely unmonitored gas streams.
Specifications –
| Range | Calibrated 1 to 1000 ppmv with trend indication above calibrated range |
| Outputs | Four line x 20 character vacuum fluorescent digital display Two fully programmable 4 to 20 mA analog outputs, into 1200 ohm load RS484 bidriectional serial port |
| Alarms | Three independent contact closures, 30 VDC maximum, 1A resistive load for system alarm, range alert/or calibration alert, concentration alert/or calibration alert. Alarm signals are available on the RS484 interface. |
| Sensitivity | 0.02 ppmv or 0.5% of range, whichever is greater |
| Accuracy | ±1.0 ppmv or ±5% of reading, whichever is greater |
| Operating Pressure | Atmospheric |
| Inlet Pressure | 1 to 10 Bars (15 to 150 psig) |
| Exhaust Pressure | Atmospheric |
| Sample Flow Requirements | Less than 600 mL/min at STP |
| Reference Gas Quality Requirements | Provided by included dryer and contaminant trap |
| Sample Gas Temperature | 0º to 100ºC (32º to 212ºF) |
| Ambient Operating Range | 4º to 40ºC (40º to 105ºF), 90% relative humidity, non-condensing, noncorrosive atmosphere |
| Software Features | Displays ppmv, dew point, or lb/mmft3 moisture reading, timer status, and instrument status |
| Power Requirements | 85 to 265 volts, 47 to 63 Hz |
| Mounting Options | Available for stand-alone or 19″ rack installation |
| Dimensions (WxHxD) | 43.2 x 13.2 x 38.1 cm (17 x 5.2 x 15 in) |
| Rack-mount Version | Same as above, except height is 22.1 cm (8.71 in) |
| Net Weight | 8.2 kg (18 lb) |
