Description
MODEL 3010TB Split architecture version
Process Trace Oxygen Analyzer
The Series 3000T Trace Oxygen Analyzers provides powerful microprocessor technology while offering tremendous versatility in the low ppm ranges. This instrument offers three user-selectable linear ranges, high accuracy, fast response, adjustable alarms, and auto diagnostics.
No zero gases are required in most applications. The heart of the analyzer is a specially qualified Micro-fuel Cell designed to measure oxygen in the gas sample.
The sensor is unequaled in the industry for its accuracy, sensitivity, and reliability. The instruments can be used as a separate unit or as a component of a larger analytical system.
Applications include: Air separation, Petrochemical, Chemical processes, Furnace
The Model 3010TB Trace Oxygen Analyzer is designed as a split architecture version of the 3000 series. A bulkhead mount, NEMA 4 rated control unit designed for non-hazardous areas, controls a specially developed analysis unit that can operate in a hazardous area.
The explosion proof enclosure is NEMA 4/7 rated, U/L and CSA listed for Class I, Division 1, Groups B, C, and D service. Options include cal / zero valves and flame arrestors.
Teledyne’s Model 3000TB and 3010TB Bulkhead Mount Process Trace Oxygen Analyzers are versatile, microprocessor-based instruments for detecting oxygen in a variety of gases. The 3000TB serves as a general purpose unit, while the 3010TB is designed as a “split architecture” instrument — a general purpose, wall mounted Control Unit for non-hazardous areas controls a remote Analysis Unit that can operate in hazardous areas. Simple menu choices, membrane command switches, and a large LED display make setup and operation clear and quick.
Three Analysis Ranges
Three user-configurable ranges are standard, with excellent linearity precluding recalibration when changing ranges. Two fully programmable concentration alarms and relay functions provide the versatility to satisfy nearly any requirement. All features offer a sophistication that assure years of reliable service.
Convenient Outputs for Data
Standard 0-1 VDC and isolated 4-20 mADC outputs are provided for oxygen measurements and range identification. An RS-232C serial port allows the user to introduce span and zero gases through a host computer.
Extended Life, Maintenance Free Oxygen Sensor
The instruments use a long life Micro-fuel Cell to measure traces of O2 in the sample gas. The L-2C (L-2LC for CO2) sensor sets industry standards for accuracy and sensitivity, and comes with a 1 year warranty. Expected life for the sensor is two years. The sensor is specific to oxygen and accurately monitors gas streams containing up to 100% hydrocarbons. The Micro-fuel Cell produces an output that is linear from 0 ppm to 100% O2 enabling the use of ambient air for calibration. These units can also accommodate the use of a certified ppm O2 span or zero gas which speed calibration when necessary
Standard Features
• NEMA 4/7 rated enclosure
• RFI hardened
• Security code protection
• Microprocessor based electronics
• Signal output: 0-1VDC & 4-20 mADC
• Programmable Auto Ranging
• Two fully-adjustable concentration alarms and a system failure alarm
• Self diagnostics
| 3000 Trace Series Overview | ||
| 3000TA-XL | Panel mount | 0-1 ppm O2 |
| 3000ZA2G-XL | Panel mount | 0-1 ppm O2, ZrO2 type |
| 3000ZA2G | Panel mount | 0-10 ppm, ZrO2 type |
| 3000TA | Panel mount | 0-10 ppm O2 and above |
| 3000TB | Wall mount | 0-10 ppm O2 and above |
| 3010TA | Split architecture – panel mount control unit | 0-10 ppm O2 and above |
| 3010TB | Split architecture – wall mount control unit | 0-10 ppm O2 and above |
| 3010TAC | Split architecture – I/S Cenelec, panel mount control unit | 0-10 ppm O2 and above |
| 3010TBC | Split architecture – I/S Cenelec, wall mount control unit | 0-10 ppm O2 and above |
| 3020T | Fully explosion proof unit unit | 0-10 ppm O2 and above |
